KSI-1802R SX HCFFFB-16

All-in-One Access and Infection Control

All-in-One Access and Infection Control

Disinfect-able, scrubbable, multi-factor authentication keyboard, with KSI’s patented LinkSmart® button, Imprivata® Confirm ID compatibility, Imprivata® Proximity Aware compatibility, RFIDeas card reader, and Crossmatch™ fingerprint biometrics.

Key Features

  • Imprivata® Confirm ID compatibility for hands-free mobile authentication
  • Imprivata® Proximity Aware compatibility for secure logoff
  • Contactless, programmable RFIDeas WaveID® 80582 Dual Band 125kHz and 13.56Mhz card reader
  • Crossmatch™ 500 dpi biometric fingerprint sensor
  • ePrescribe ready, in compliance with DEA requirements
  • LinkSmart® cleaning button with optional San-a-Key® software for infection control at the clinical desktop
  • Smooth, crevice-free surface can be scrubbed, sprayed and wiped
  • Backlit keys, with three levels of illumination
  • Security and infection control routed through a single USB frees up valuable thin and zero client ports
  • Compact size fits medical carts

Multi-Factor Authentication

The KSI-1802R SX HCFFFB-16 meets DEA-mandated two-factor authentication required for electronic prescribing.

Factor one is met with use of Imprivata® Confirm ID, that offers hands-free mobile authentication.  Factor two is met with integrated Crossmatch fingerprint biometrics.

The keyboard also integrates a 125KHz HID® and 13.56Mhz badge reader for fast tap in, tap out and further enhanced multi-layered security.  Compatibility with Imprivata® Proximity Aware offers convenient logoff security.

San-a-Key® Infection Control

KSI’s patented LinkSmart® cleaning button temporarily disables keys for easy disinfection using EPA-approved germicidal wipes.  No-cost San-a-Key® client software provides an onscreen, animated cleaning guide, cleaning push reminders, and user-defined, scheduled cleaning.  San-a-Key® enterprise version generates analytics that allow administrators to know when, where, and by whom KSI keyboards are cleaned on an enterprise-wide basis.

Single Sign On Compatibility

Imprivata® OneSign®

Compliance

HIPAA
GSA FIPS 201
DEA ePrescribe

Typical Applications

Healthcare
Pharmacy

WaveID® Card Reader Specifications

  • Typical maximum read range: 1.0” – 3.0” (2.5 – 7.6cm) dependent upon proximity card type and environmental conditions
  • Dimensions: 3-3/8” x 2” x 0.6” (8.57cm x 5.08cm x 1.52cm)
  • Weight: 0.45 lbs (204g)
  • Power supply: USB self-powered
  • Indicators: Tri-state LED, dual tone beeper
  • Transmit frequency: 125 kHz operating temperature range: -22° to 150°F (-30° to 65°C)
  • Operating humidity range: 5% to 95% relative humidity, non-condensing
  • Storage temperature range: -40° to 185°F (-40° to 85°C)
  • Certifications: FCC, United States; CE Mark Europe; C-TICK, RoHS, Industry Canada (*Pending)

Crossmatch™ Sensor Specifications

  • Capacitive Crossmatch™ TCS1CD fingerprint sensor
  • FIPS 201 compliant
  • Resolution: 508 DPI meets FBI iAFIS requirement
  • 8-bit per pixel gray scale
  • Up to 12 frames per second capture rate
  • 8-bit RAM interface
  • 20-pin 0.5mm pitch flat flex cable connector
  • 27 x 20.4mm outline & only 3.5mm thick (~1/8”)
  • Power: 20mA during capture (typical)
  • 1ma during sleep (typical)
  • 4.4v to 5.5v (standard image mode, no bezel)
  • 4.5v to 4.6v (FIPS-201 & EIM mode w/bezel)
  • +/- 15 KV ESD (IEC 61000-4-2 level 4)
  • 2M fingerprint placements (FIPS-201 standard coating)
  • 4M fingerprint placements (SteelCoat coating)
  • Environment: -30 to +85C operating
  • -40 to +85 storage
  • RoHS compliant

1802 Series Keyboard Specifications

  • Weight:  2.2 lbs.
  • Dimensions:  15″W x 7-3/8″D x 1-5/16″H
  • Available in colors
  • High speed USB interface
  • Integrated Crossmatch® TCS1 silicon-surfaced 500 dpi biometric fingerprint sensor
  • Integrated RF IDeas™ 80582 dual band proxPlus® 125 kHz & 13.56 MHz contact-less card reader
  • Integrated KSI LinkSmart® patented cleaning button
  • Windows 8 and 10 compatible
  • Linux compatible

Use only germicidal wipes that contain United States EPA-approved, hospital-grade disinfectants.

Germicidal Wipes Certified for Use with our San-a-Key® Keyboards

       

Toxic (Requires Mask and Gloves)

CaviWipes™ Surface Disinfectant
Clinell® Universal Wipes
Clorox Healthcare® Bleach Germicidal Wipes
Clorox Healthcare® Hydrogen Peroxide Disinfectant Wipes
Clorox Dispatch® Hospital Cleaner Disinfectant Towels
Opti-Cide® Surface Wipes
PDI® Sani-Cloth Bleach Germicidal Disposable Wipes
PDI® Sani-Cloth AF3 Germicidal Disposable Wipes
PDI® Super Sani-Cloth Germicidal Disposable Wipes
PDI® Sani-Cloth AF Germicidal Disposable Wipes
PDI® Sani-Cloth Bleach Germicidal Disposable Wipes
PDI® Sani-Cloth HB Germicidal Disposable Wipes
PDI® Sani-Cloth Prime Germicidal Disposable Wipes

Download instructions for using the KSI LinkSmart® Keyboard with patented San-a-Key® analytics software.
San-a-Key® is compatible with all KSI SX-version keyboards.

      

We’d love to hear from you.  Please send us your inquiry and any questions you may have about KSI products or service.

Inquiry Form for Product Pages







First

Last






 

© 2019 Key Source International